User`s guide

30
Wizards
This page contains wizards that simplify common configuration tasks. These wizards will
change the minimum number of parameters to complete the required configuration task.
However, due to the generic nature of the wizards they may not be suitable for all
circumstances.
Quick Start Wizard
The Quick Start Wizard will display the options required for basic configuration of the Eth 0,
WLAN and WWAN interfaces.
LAN to LAN IPsec Tunnel Wizard
This wizard will help you to configure an aggressive mode LAN to LAN IPsec tunnel to a
remote host.
GOBI Module Carrier Wizard
Used with routers that have a GOBI module installed, to configure the router for a specified
WWAN carrier.
Dual SIM Wizard
Use this wizard to configure the router to detect a link failure and automatically switch to
the second installed SIM. This wizard only helps to configure the most commonly used
methods of link error detection. There are more options detailed in Application Note 7 which
can be found on the TransPort Support pages of the Digi website.
Note:
The wizards are designed to assist users. For very specific or uncommon requirements then
further manual configuration may be required after completing any of the above wizards.