User`s guide

297
Parameters
TCP or XoT
This parameter controls the switching of incoming X.25 calls received via TCP or XOT. Select
the interface to which data should be switched from the drop down list, or select “Off” and
the protocol switch will not respond to any incoming XOT or TCP connections.
LAPD
This parameter controls the switching of incoming X.25 calls received via ISDN LAPD. Select
the interface to which data should be switched from the drop down list, or select “Off” and
the protocol switch will not respond to any incoming LAPD calls.
LAPB X
This parameter controls the switching of incoming X.25 calls received via LAPB X. Select the
interface to which data should be switched from the drop down list, or select “Off” and the
protocol switch will not respond to any incoming LAPB X calls.
LAPB X PVC
This parameter controls the switching of incoming X.25 calls received via an LAPB X PVC.
Select the interface to which data should be switched from the drop down list, or select
“Off” and the protocol switch will not respond to any incoming PVC calls on LAPB X.
XOT PVC
This parameter controls the switching of incoming X.25 calls received via an XOT PVC.
Select the interface to which data should be switched from the drop down list, or select
“Off” and the protocol switch will not respond to any incoming XOT PVC calls.
TCP XOT backup to interface
If any of the Switch from parameters has been set to XOT, and XOT is unavailable, this
parameter may be used to specify an alternative interface to switch the X.25 call to. Any of
the other interfaces may be chosen, or “None”. If “None” is chosen, then no backup call will
be attempted.
LAPD backup to interface
If any of the Switch from parameters has been set to LAPD, and LAPD is unavailable, this
parameter may be used to specify an alternative interface to switch the X.25 call to. Any of
the other interfaces may be chosen, or “None”. If “None” is chosen, then no backup call will
be attempted.