User`s guide

292
Entity Instance Parameter Values
Equivalent Web
Parameter
modbus n rawmode1
1 = enabled, 0 =
disabled
Raw Mode (row 2)
modbus n bcasts_on OFF, ON Broadcast support.
MODBUS Slaves
Configuration – Network > Legacy Protocol > MODBUS Gateway> MODBUS Slaves
This page defines access for the following MODBUS slaves when operating as "act-as-slave". Up to 32
slave definitions may be defined.
Slave addresses/unit ids
This field specifies the address of the slave unit.
Remote Host
The value in this text box specifies the IP address of the remote host, i.e. the slave unit.
IP Port
This is the IP port number. The default port is 502.
IP Mode
Select the IP mode using this drop down list. The default mode is TCP.
Add
Click on the add button to add the slave.