User`s guide

267
Entity Instance Parameter Values
Equivalent Web
Parameter
use PANS context x
X.25
Configuration – Network > Legacy Protocol > X.25
The Configuration – Network > Legacy Protocol > X.25 menu has the following sub-
menu options:
• General
• LAPB
• NUI Mappings
• NUA / NUI Interface Mappings
• Calls Macros
• IP to X.25 Calls
• PADS n
• X.25 Settings
• IP Settings
• PADs
• X.25 PVCs
General
Configuration – Network > Legacy Protocol > X.25> General
This section contains some global X.25 settings.
When answering a X.25 call, use the addresses from CALL packet in the CALL CNF
packet
When this setting is enabled when answering a call the called and calling addresses from the
CALL packet are used in the X25 CALL CNF (call confirm packet) that the unit sends to
answer the call. This setting can be enabled on a per “interface type” basis, (LAPD, LAPB or
XoT)
Reset XOT PVC if the router is the Initiator
When this parameter is enabled the unit is responsible for resetting the links when an XOT
PVC comes up. This parameter should only be set to “Off” when it is known that the
responder will reset the links.
Reset XOT PVC if the router is the Responder
When this parameter is set to “On” the unit is responsible for resetting the links on XOT PVC
links when it is the responder. The default for this parameter is “Off”.
Include length of header in IP length header
For all X.25 calls which include an IP header length indication (i.e. IP Length Header is set
to “On” a TPAD or PAD, etc.) this parameter specifies whether the length indicated includes
or excludes the length of the header itself.