User`s guide

266
Entity Instance Parameter Values
Equivalent Web
Parameter
tpad n tenqdel 0 - 5000
Delay sending ENQ
characters to TPAD
terminal for x milliseconds
when a call has been
connected
tpad n tackdel 0 – 10000
Wait for x milliseconds for
an ACK before
retransmitting the data
tpad n dsync 1 = enabled, 0 = disabled
Transmit TPAD
transactions directly in a
Synchronous frame
tpad n inclrc 1 = enabled, 0 = disabled Include LRC
tpad n incllrc 1 = enabled, 0 = disabled Include LRC line
tpad n fpar 1 = enabled, 0 = disabled
Force parity when sending
data to the terminal
tpad n lrpar 1 = enabled, 0 = disabled
Strip parity when sending
data to the host
tpad n lfpar 1 = enabled, 0 = disabled
Force parity when sending
data to the host
tpad n strip_tspaces 1 = enabled, 0 = disabled Strip Trailing Spaces
tpad n ackdat 1 = enabled, 0 = disabled
Acknowledge TPAD data
packets
tpad n stx_2_soh 1 = enabled, 0 = disabled
Convert leading STX
character to SOH
tpad n eot_only 1 = enabled, 0 = disabled
Terminate TPAD call is
EOT only
tpad n tresp 0 – 1000
Clear TPAD call if there is
no response to a TPAD
transaction request for x
seconds
tpad n texcess 0 – 100
Generate an event when
a TPAD transaction takes
longer than x seconds
tpad n tsla 0 – 3000
When the transaction
time exceeds x
milliseconds, increment
the "SLA Exceptions"
statistic
tpad n clear_time 0 - 2147483647
Clear the call x seconds
after receiving a response
tpad n dialctx 0 - 255
If the terminal dial
command specifies V.120