User`s guide

265
Entity Instance Parameter Values
Equivalent Web
Parameter
milliseconds
tpad n trig_str text
Create an event when
reply from X.25 host
matches
tpad n IPaddr IP address
Connect to remote IP
address
tpad n iphdr
0=Off
1=On
2=8583 Ascii 4 byte
IP length header
tpad n termid text Use Terminal ID (TID)
tpad n dotermid 1 = enabled, 0 = disabled
Replace TID provided by
connected terminal with
configured TID
tpad n tid text
Use TID xxxxxxxxx with
incoming APACS 50
polling calls
tpad n merchnum text
Use merchant Number
tpad n useconstr 1 = enabled, 0 = disabled Use Connect String
tpad n constr text Use Connect String
tpad n pollchars text
The polling character set
is c
tpad n domsgnb 1 = enabled, 0 = disabled
Enable Message
Numbering
tpad n disdir 1 = enabled, 0 = disabled Disable Direct Mode
tpad n bdir 1 = enabled, 0 = disabled Boot to Direct Mode
tpad n uaarc 0 - 99
Use response code n in
"unable to authorise"
message
tpad n clear_dirtime 0 - 60000
Clearing time n
milliseconds
tpad n trandel 0 - 5000
Delay transmitting the
APACS 30 string for x
milliseconds after
connecting to X.25 host
tpad n teretran 1 = enabled, 0 = disabled
Retransmit APACS 30
string if error detected
tpad n delstx 1 = enabled, 0 = disabled STX/ETX removal
tpad n no_enq 1 = enabled, 0 = disabled
Do not transmit ENQ
characters