User`s guide

220
Accept incoming PPTP connections
When checked, this checkbox allow the router to act as a PPTP server and accept incoming
VPN connections.
Enable Server mode
When checked, this checkbox causes the router to send call_out call requests to the remote
device. In the default state which is unchecked, the router will send a call_in request to the
remote device.
Enable Socket mode
When checked, this checkbox enables the use of a Digi proprietary mode whereby PPP
packets are sent via the PPTP control socket rather than in GRE packets.
Encrypt control data using SSL version n
When checked, this checkbox causes the router to encrypt the control data using SSL. This
is a Digi proprietary function and is not part of standard PPTP. The drop-down list allows the
SSL version to be selected. The available options are:
• Use default
• TLSv1 only
• SSLv3 only
• SSLv2 only.
Enable PPTP debug
When checked, this checkbox enables debug tracing.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
pptp 0 - 9 name
Up to 30
characters
Description
pptp 0 - 9 remhost
Valid IP address
a.b.c.d
Remote Host a.b.c.d
pptp 0 - 9 ll_ent
Blank, PPP, ETH
Blank means Auto
Use Interface x,y
pptp 0 - 9 ll_add
0 - 4294967296
Use Interface x,y
pptp 0 - 9 listen OFF,ON
Accept incoming PPTP
connections
pptp 0 - 9 swap_io OFF,ON Enable Server mode
pptp 0 - 9 usesock OFF,ON Enable Socket mode
pptp 0 - 9 sslver
Blank,SSL,TLS1,S
SL3,SSL2
Blank is disabled
(default)
SSL means use
default.
Encrypt control data using SSL
version n
pptp 0 - 9 debug OFF,ON Enable PPTP debug
OpenVPN
Configuration - Network > Virtual Private Networking (VPN) > OpenVPN