User`s guide

Using the Web Interface

To access the built-in web pages using a web browser (e.g. Internet Explorer), there are

two options.

To access the LAN port follow the instructions below. To access the web interface over a

serial connection,see Web Access via Serial Connection.

Access Via a LAN Port

By default, the Digi Transport has a static IP address of 192.168.1.1 with DHCP server

enabled. To acess the unit using a web browser (e.g. Internet Explorer), simply connect an

Ethernet cable between the LAN port on the Digi Transport and your PC. Make sure your PC

is setup to automatically receive an IP address by selecting

Start > Control Panel >

Network > Configuration

and verifying the configuration.

Note:

All models are auto-sensing for 10/100 operation. Most models are also auto MDI/MDX, i.e.

will automatically work with either a straight-through or cross-over cable. The only

exceptions are the IR2140 and GR2130, which are NOT auto MDI/MDX