User`s guide

177
Entity
Instance
Parameter
Values
Equivalent Web Parameter
rip n enable on,off Enable RIP
rip n interval 0 - 2147483647
Send RIP advertisement every s
seconds
rip n ripto 0 - 2147483647
Mark routes as unusable if we
don’t get advertisement for s
seconds
rip n riplingerto 0 - 2147483647
Delete routes after another s
seconds
rip n updatestatic on,off Allow RIP to update static routes
rip n poisonreverse on,off Enable Poison Reverse
Access Lists
Configuration – Network > IP Routing/Forwarding> RIP> Global RIP Settings>
Access Lists
The router has the ability to modify route metrics based upon received RIP responses. Static
routes and default routes will have their metric modified if the route fits within one of the
routes found within the RIP packet. For Ethernet routes, the gateway for the route will be
set to the source address of the RIP packet. The route modifications will be enforced for 180
seconds unless another RIP response is received within that time.
RIP packets must have a source address that is included in the RIP access list.
Adding permitted IP addresses to the access list is controlled using a table with the single
parameter described below.
IP Address a.b.c.d
The value in this text box is the IP address to be added to the list of IP addresses that RIP
packets must come from if they are to modify route metrics. Up to ten IP addresses may be
added. The Add and Delete buttons work in the usual way for configuration tables.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
riprx 0 - 9 IPaddr
Valid IP address
a.b.c.d
IP Address a.b.c.d
Authentication Keys
Configuration – Network > IP Routing/Forwarding> RIP> Global RIP Settings>
Authentication Keys
RIP authentication keys are used with the “plain password” and MD5 RIP authentication
methods.
Authentication Key n
Key k
The value in this text box is the RIP authentication key. Enter a string of up to 16 characters
long. A current key will not be displayed.
Confirm Key