User`s guide

176
Entity
Instance
Parameter
Values
Equivalent Web Parameter
def_route n deact_ent2 Blank,PPP
When this route becomes
available, deactivate the
following interfaces x,y
def_route n deact_add2 0 – 2147483647
When this route becomes
available, deactivate the
following interfaces x,y
def_route n unoos_secs 0 – 2147483647
Keep this route in service for
s seconds after OOS state is
cleared
def_route n rgroup 0 - 255
Assign this route to recovery
group n
RIP
Configuration – Network > IP Routing/Forwarding> RIP
The web pages and command line commands described in this section control the
configuration of the routing Information Protocol (RIP) functionality of the router.
Global RIP Settings
Configuration – Network > IP Routing/Forwarding> RIP> Global RIP Settings
Enable RIP
When checked, this checkbox enables the RIP functionality.
Send RIP advertisements every s seconds
The value in this text box specifies the interval between sending RIP packets. These packets
contain the current routes held by the router (e.g. any active PPP routes), static routes and
the default route. A value of 0 disables sending.
Mark routes as unusable if we don’t get advertisements for s seconds
The value in this text box specifies the time for which an updated metric will apply when a
RIP update is received. If no updates are received within this period, the usual metric will
take over.
Delete routes after another s seconds
The value in this text box specifies the length of time that the router will continue to
advertise this route when a RIP update timeout occurs and the route metric is 16. This
behaviour is designed to help propagate the dead route to other routers. The router will no
longer use a metric advertised by a RIP update if the route has been set out of service
locally.
Allow RIP to update static routes
When checked, this checkbox allows an incoming, matching RIP update to change the
metric of the static route. This happens when the update matches a configured static route.
Enable Poison Reverse
When checked, this checkbox enables poison reverse, to notify when a neighbouring router
is unavailable.
Related CLI Commands