User`s guide

173
Entity
Instance
Parameter
Values
Equivalent Web Parameter
waiting for the interface to
connect
route n deact_ent Blank,PPP
When this route becomes
available, deactivate the
following interfaces x,y
route n deact_add 0 – 2147483647
When this route becomes
available, deactivate the
following interfaces x,y
route n deact_ent2 Blank,PPP
When this route becomes
available, deactivate the
following interfaces x,y
route n deact_add2 0 – 2147483647
When this route becomes
available, deactivate the
following interfaces x,y
route n unoos_secs 0 – 2147483647
Keep this route in service for s
seconds after OOS state is
cleared
route n rgroup 0 - 255
Assign this route to recovery
group n
Default Route n
Configuration – Network > IP Routing/Forwarding> Static Routes> Default Route
n
The following two web pages and associated command line commands are used to set up
default IP routes that will be used to route non-local IP addresses not specified in a static
route. The parameters are identical to those on the static route pages with the exception
that there are no IP address or Mask parameters.
Description
The text in this text box is used to assign a convenient and memorable description for the
route.
Default route via:
Gateway a.b.c.d
As per equivalent parameter in Routes n.
Interface x,y
As per equivalent parameter in Routes n.
Metric n
As per equivalent parameter in Routes n.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
def_route n descr Up to 20 characters Description
def_route n gateway
Valid IP address
a.b.c.d
Gateway a.b.c.d