User`s guide

161
Confirm DNS Server Password
The password should be entered into this text box to confirm it.
Local time offset from GMT
Auto detect
The two radio buttons here control whether or not the offset of the local time from GMT
should be auto-detected or specified. This feature is required since a GMT timestamp must
be included as part of the authentication message. When set to auto-detect the router will
automatically apply the correction. When auto detect is not selected, the correct offset
should be selected from the drop-down list.
Required Time Accuracy
The value in this text box specifies the permitted variance between the router’s time and
that of the DNS server. If the time difference exceeds this limit, the DNS update will fail.
Allow DNS clients to cache this entry for s seconds
The value in this text box specifies how long a router that resolved the address is allowed to
cache that address for.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
dnsupd 0 server
Valid IP address
a.b.c.d
Send an update to DNS Server
a.b.c.d
dnsupd 0 name
up to 20
characters
Name
dnsupd 0 zone
up to 64
characters
Zone
dnsupd 0 ifent PPP,ETH
when interface x,y becomes
active
dnsupd 0 ifadd
Valid instance
number
when interface x,y becomes
active
dnsupd 0 upd_int
0 – 2147483648
(seconds)
Also send an update every h
hrs, m mins s secs
dnsupd 0 delprevrr OFF,ON
The DNS server should delete all
previous records
dnsupd 0 username
Valid username
(up to 20
characters)
DNS Server Username
dnsupd 0 password
Valid password
(up to100
characters)
DNS Server Password
dnsupd 0 b64pwd OFF,ON Password is Base64 encoded
dnsupd 0 autozone OFF,ON
Local time offset from GMT auto
detect