User`s guide

155
FTP Root Dir (for WYSE Terminals)
The value in this text box specifies the root directory for FTP transfers. This is also a custom
option for use with WYSE terminals.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
dhcp n NBNS
Valid IP address
a.b.c.d
NetBIOS Name Server a.b.c.d
dhcp n NBNS2
Valid IP address
a.b.c.d
Secondary NetBIOS Name
Server a.b.c.d
dhcp n tftp
Valid IP address
a.b.c.d
TFTP Server Address a.b.c.d
dhcp n ftp
Valid IP address
a.b.c.d
FTP Server Address a.b.c.d
dhcp n ftproot
Up to 64
characters
FTP Root Dir
Logical Ethernet Interfaces
Configuration – Network > DHCP Server> Logical Ethernet Interfaces
The web pages in this section are simply a duplicate of the above pages but applying to
logical, rather than physical Ethernet interfaces.
DHCP Options
Configuration – Network > DHCP Server> DHCP Options
The DHCP Option pages allow custom (or non-standard) DHCP options to be configured and
sent to the DHCP client when requesting an IP address and other DHCP parameters. This is
useful for devices such as IP telephones that use specific strings. On the web page, these
(up to ten) options are configured using a table. The table contains the following fields:
Option
The value in this box specifies the DHCP option number.
Data type
The value in this text box specifies the data type for the option and can be any one of the
following; 1,2 or 4 byte value, IPv4 address, text string or hexadecimal data.
Value
The value in this text box specifies the actual data that will be sent in the DHCP option
message.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
dhcpopt n optnb
0 - 2147483647
Default 0
Option
dhcpopt n type
i1 = 1 byte value
i2 = 2 byte value
Data type