User`s guide

125
Enable Multitx
Checking this checkbox displays the MultiTX settings in the GUI and enables the MultiTX
function on the router.
Serial Port
This field specifies the serial interface to use. Data received on this serial will be forwarded
to all configured remote hosts.
Protocol
This field specifies whether TCP or UDP will be used as the transport method.
Socket Inactivity Timeout
If there is no data transmitted for the specified number of seconds, the socket will be
closed. 0 = no timeout.
Send Socket ID
When enabled, the text entered into the ‘Socket ID’ field is transmitted to the remote host
when the socket connects.
Reopen Closed Socket
This enabled an always-on mode. If the socket is closed for any reason, the router will
attempt to reconnect to the remote host.
Socket ID
This parameter is used in conjunction with Send Socket ID. Text entered will be
transmitted when the socket connects. \r can be used for CR. \n can be used for NL.
Hex can be specified by using \xhh where hh is replaced with the hex code, eg \x04 will
define binary character 04.
Send serial data only when the match string is present
Match string function is enabled when users check this checkbox.
Match String
When enabled, serial data will only be forwarded to remote hosts when the ‘Match String’
text is present.
Strip match string before sending