User`s guide

124
Entity
Instance
Parameter
Values
Equivalent Web Parameter
trace
information in
the analyser
trace.
2: print the
trace
information out
of the debug
port.
3: place
information in
the trace
rport 0 debug
0, 1,2,3
0: Off
1: place the
debug
information in
the analyser
trace.
2: printf the
debug
information out
of the debug
port.
3: print out the
debug port.
rport 0 dcddiscards On/Off
[ Description: discards data when
DCD is OFF from the modem]
rport 0 duplex
0=full
1=half
[description: configures half
mode/full duplex modes]
Multitx
Configuration> Network> Serial> MultiTX
The MultiTx page allows users to enable and edit the MultiTx parameters. This supports
sending serial data to multiple (up to 5) TCP or UDP destinations. When enabled, the
configured ASY port is opened and serial data from the port is sent to all configured
destinations.