User`s guide

123
This configures the interval at which TCP Keep-Alives are sent over the RealPort connection.
A value of 0 means that Keep-Alives are not sent.
Send RealPort Keep-Alives every s seconds
This configures the interval at which RealPort Keep-Alives are sent over the RealPort
connection. A value of 0 means that Keep-Alives are not sent.
Enable exclusive mode
Selecting this option enables exclusive mode. Exclusive mode allows a single connection
from any one RealPort client ID to be connected only. If this setting is enabled and a
subsequent connection occurs that has the same source IP as an existing connection, the
old existing connection is forcibly reset under the assumption that it is stale.
Enable authentication
Selecting this option enables RealPort authentication.
Authentication secret
This configures the RealPort authentication secret.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
rport 0 enabled OFF,ON Enable RealPort
rport 0 ipport 0 - 65535 Listen on port
rport 0 maxnbsocks 0 - 255 Maximum number of sockets
rport 0 encryption OFF,ON Enable encrypted RealPort
rport 0 encport 0 - 65535 Encryption mode to listen on port
rport 0 maxnbencsocks 0 - 255
Maximum number of encryption
sockets
rport 0 initiate OFF,ON Enable Device Initiated RealPort
rport 0 IPaddr
Valid IP address
a.b.c.d
Connect to host a.b.c.d Port n
rport 0 initiateport 0 - 65535 Connect to host a.b.c.d Port n
rport 0 initiatebackoff 0 - 255
Allow s seconds between
connection attempts
rport 0 tcpkeepalives 0 - 255
Send TCP Keep-Alives every s
seconds
rport 0 rportkeepalives 0 - 255
Send RealPort Keep-Alives every
s seconds
rport 0 exclusive OFF,ON Enable exclusive mode
rport 0 auth OFF,ON Enable authentication
rport 0 secret
Up to 30
characters
Authentication secret
rport 0 status
[Description: displays the current
Realport status]
rport 0 trace
0, 1,2,3
0: Off
1: place the