User`s guide

111
Reset the data limit on the n day of the month
The value in this text box defined the day of the month on which the data limit is reset to
zero.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
ppp n metric 0 - 255 Metric
ppp n aodion
0 – 2
0 = disabled
1 = enabled
2 = On and return
to service
immediately
Enable “Always On” mode of
this interface, On, On and
return to service immediately
ppp n immoos ON, OFF
Put this interface “Out of
Service” when an always-on
connection attempt fails
ppp n aodi_dly 0 – 2147483647
Attempt to reconnect after s
seconds
ppp n aodi_dly2 0 – 2147483647
If an inhibited PPP interface is
connected, attempt to re-
connect after s seconds
ppp n pwr_dly 0 – 2147483647
Wait s seconds after power-up
before activating this interface
ppp n tband 0 - 4
Control when this interface can
connect using Time Band n
ppp n minup 0 – 2147483647
Keep this interface up for at
least s seconds
ppp n maxup 0 – 2147483648
Close this interface after s
seconds
ppp n maxuptime 0 – 2147483647
if it has been up for m minutes
in a day
ppp n timeout 0 – 2147483648
if the link has been idle for s
seconds
ppp n timeout2 0 – 2147483648
Alternative idle timer for static
routes s seconds
ppp n rxtimeout 0 – 2147483648
if the link has not received any
packets for s seconds
ppp n maxneg 0 – 2147483648
if the negotiation is not
complete in s seconds
ppp n uplogmins 0 – 2147483647
Generate an event after this
interface has been up for m
mins
ppp n dlwarnkb 0 – 2147483647 Issue a warning after n units
ppp n dlstopkb 0 – 2147483647
Stop data from being