User`s guide

101
Use interface x,y for the source IP address of IPsec packets
If it is required to use another interface (i.e. not the interface currently being configured)
as the source address for IPsec packets, this may be achieved by selecting the desired
interface from the drop-down list and typing the desired interface instance number into
the adjacent text box.
Enable the firewall on this interface
When checked, this checkbox applies the firewall rules to traffic using this interface.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
ppp n name
Up to 25
characters
Description
ppp n phonenum up to 25 digits Dial out using numbers
ppp n ph2 “ “
ppp n ph3 “ “
ppp n ph4 “ “
ppp n prefix 0 – 9999999999 Prefix n to the dial out number
ppp n username
Up to 60
characters
Username
ppp n password
Up to 40
characters
Password
ppp n IPaddr 0.0.0.0
Allow the remote device to
assign a local IP address to this
router
ppp n IPaddr
Valid IP address
a.b.c.d
Try to negotiate a.b.c.d as the
local IP address for this router
(in conjunction with l_addr)
ppp n l_addr
OFF,ON
When ON, allows
negotiation
when OFF force
use of specified IP
address
Use a.b.c.d as the local IP
address of this router
ppp n DNSserver
Valid IP address
a.b.c.d
Use the following DNS servers if
not negotiated
Primary DNS server a.b.c.d
ppp n secDNS
Valid IP address
a.b.c.d
Use the following DNS servers if
not negotiated
Secondary DNS server a.b.c.d
ppp n IPmin
Valid IP address
a.b.c.d
Assign remote IP addresses
from a.b.c.d to a.b.c.d
ppp n IPrange 0 - 255
Assign remote IP addresses
from a.b.c.d to a.b.c.d
ppp n transDNS
Valid IP address
Primary DNS server a.b.c.d