User`s guide

98
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
LAPD n enabled off, on Enable LAPD n
LAPD n dtemode off, on Mode
LAPD n n400 1 - 255 N400 Counter
LAPD n tnoact 1000 - 60000 RR Timer n msecs
LAPD n t1time 1 - 60000 T1 Timer n msecs
LAPD n t200 1 – 60000 T200 Timer n msecs
LAPD n tei 0 - 255 TEI
LAPD n window 1 - 7 D-channel X.25 Tx Window Size
LAPD n tthruput 0 - 1410065407 Tx Throughput
LAPD n rthruput 0 - 1410065407 Rx Throughput
LAPD n keepact off, on Reactivate D-channel connection
LAPD n reactsecs 0 - 2147483647 Reactivate after n secs
LAPD n nodeact off
After X.25 PAD session is
terminated:
Deactivate the LAPD session
LAPD n nodeact on
After X.25 PAD session is
terminated:
Do not deactivate the LAPD
session
LAPD n d64smode off, on Enable D64S Mode
LAPD n d64schan 1, 2 First D64S B-channel: B1, B2
Configuration – Network > Interfaces > PSTN
This section of the web interface appears when the router is fitted with an optional internal
PSTN MODEM card. When first powered up, navigating to the Configuration – Network >
Interfaces > PSTN page will show a message indicating that the MODEM card does not
have a PPP instance associated with it. Follow the link on the page and select an unassigned
PPP interface to the MODEM. When the browser is refreshed and the Configuration –
Network > Interfaces > PSTN page redisplayed, it should show the parameters
described below, along with a message at the top of the page indicating which PPP instance
has been selected.
This PSTN interface is using PPP n
This message simply states which PPP instance has been assigned to the interface.
Description
The value in this text box is a memorable name for the interface. This may be useful when
referring to the interface, rather than having to remember the name and the function of the
interface.