User`s guide

57
Configuration - Network > Interfaces > Wi-Fi > Rogue Scan
In Rogue Scan mode, the router will perform a scan of the Wi-Fi channels and will report
what Wi-Fi Access Points it detects. This feature can be used to detect unauthorised Access
Points that might be trying to get unsuspecting Wi-Fi clients to connect them.
When an authorised Access Point is detected, an event log entry is created and an alarm
(e.g. email, SMS, SNMP Trap) can be triggered.
It is possible to configure a list of the MAC addresses of the authorised Access Points that
will not be reported when detected.
MAC Address
The MAC address of an authorised Access Point.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
macrogue n mac
MAC address with
no separators
e.g. 112233445566
MAC Address