User`s guide

Make sure that all three options are unchecked before clicking OK to return to the

Networking tab. In the This connection uses the following items list, Internet

Protocol (TCP/IP) should be the only item that is checked. Make sure that this is the case

and then click OK to return to the main dialog. You are now ready to initiate a connection.

Initiating a DUN Connection

In the main dialog, you are asked to enter a username and password. The default settings

for your unit are “username” and “password” respectively but you should change as soon

as possible in order to prevent unauthorised access to your unit (refer to the section entitled

Configuration - Security > Users for instructions on how to do this). The username is not

case sensitive, but the password is.

Note:

When you type the password it will appear as a series of dots to ensure privacy.

Once you have entered these, initiate a connection to your unit by clicking the Dial button.

During the dialling and connection process, you may see a series of status dialog boxes and,

if the connection is successful, the final dialog box will indicate that the PPP login has been

authenticated.

After a short delay, this dialog will minimise to a “linked computers” icon in the Windows

taskbar:

You should now be ready to access the built-in web pages using your Web browser. The

default “web address” for the unit is http://1.2.3.4. By default, this is also mapped to the

system IP hostname digi.router.