User`s guide
445
Creating A New Dial-Up Network Connection
You now need to create a new DUN connection through which you can access your unit.
If you are planning to connect the unit directly to your PC for configuration purposes,
connect it to the appropriate COM port now using a suitable serial cable.
If you wish to configure a remote unit, make sure it is connected to a suitable ISDN line and
make a note of the ISDN number.
1. From the Windows Start menu, select All Programs > Accessories > Communications >
New Connection Wizard. You will be presented with the New Connection Wizard introduction
screen. Click on Next > to proceed to the Network Connection Type dialog:
2. Select the Connect to the network at my workplace radio-button then
click on Next >:
3. Select the Dial-up connection radio-button then click on Next >: