User`s guide

405
Entity
Instance
Parameter
Values
Equivalent Web Parameter
eth n ethanon on, off Ethernet Interfaces
eth n ipanon on, off IP Sources
ovpn n ipanon on, off IP Sources
ppp n ipanon on, off IP Sources
ppp n pppanon on, off PPP Interfaces
tun n ipanon on, off GRE IP Sources
tun n tunanon on, off GRE Tunnel Interfaces
Related CLI Commands not available via the Web Interface
Entity
Instance
Parameter
Values
Description
ana 0 fcon on, off Enable serial flow control tracing
ana 0 stopbufs 0 - 255
Stop analyser when number of free
system buffers matches this value
ana 0 stopmsgs 0 - 255
Stop analyser when number of free
system messages matches this value
ana 0 stopflood 0 - 1
Stop analyser when Ethernet flood
protection is activated.
ana 0 lowbufcmd
Command
String
Run this command when the number
of free system buffers match
“lowbuflvel”
ana 0 lowbuflev Integer
Free system buffer threshold used by
“lowbufcmd”.
ana 0 lowmsgcmd
Command
String
Run this command when the number
of free system messages match
“lowmsglvel”
ana 0 lowmsglev Integer
Free system message threshold used
by “lowmsgcmd”.
ana 0 logdrive String
Specifies an alternate file system
drive on which to store the analyser
trace. To use an external USB flash
device, this should be set to “u:”.
If the router has an internal SDIO
flash device, it can be selected with
“s:”.
ana 0 logfile Filename
The file on the alternate drive to
which the analyser trace will be
stored.
ana 0 contfile Filename
The file on the alternate drive to
which the analyser trace will be
stored once the file indicated by
“logfile” is reaches its max size as
specified by “logsizek”.