User`s guide

397
Related CLI Commands
Command
Options
Description
sastat [dyn]
Displays the current status of all of the IPsecs tunnels.
The optional “dyn” parameter can be used to display
the status of the dynamic IPsec tunnels.
sastat [dyn] <first> <last>
Displays the current status of the IPsec tunnels in the
range from <first> to <last>.
e.g. sastat 0 49
or sastat dyn 0 49
sastat [dyn] peer <peer>
Displays the current status of the IPsec tunnels that
match the given peer. The <peer> value can contain
the ‘*’ wildcard character.
e.g. sastat peer uk-north-*
or sastat dyn peer uk-north-*
Management – Connection > Virtual Private Networking (VPN) > IPsec
peers
This page displays the current status of the IPsec peers.
This is the list of remote devices that have successfully negotiated an IPsec tunnel with the
router.
Peer IP Address
The IP address of the remote device.
Our ID
The ID of the router.
Peer ID
The ID of the remote device.
Dead Peer Detection (DPD)
The DPD status and the time until the next DPD request.
NATT Local Port
The local NAT-Traversal port.
NATT Remote Port
The remote NAT-Traversal port.