User`s guide

388
Hits
The number of times an IP packet has been matched against the firewall rule.
Direction
The direction of the IP packets that match the firewall rule.
Src IP Addr
The source IP address of the IP packets that match the firewall rule.
Src Port
The source TCP/UDP port of the IP packets that match the firewall rule.
Dest IP Addr
The destination IP address of the IP packets that match the firewall rule.
Dest Port
The destination TCP/UDP port of the IP packets that match the firewall rule.
Trans. Src IP Addr
If the firewall is configured to modify (e.g. NAT or NAPT) the source IP address of the IP
packets that match the firewall, this defines the new source IP address of the IP packets.
Trans. Src Port
If the firewall is configured to modify (e.g. NAPT) the source TCP/UDP port of the IP packets
that match the firewall, this defines the new source TCP/UDP port of the IP packets.
Trans. Dest IP Addr
If the firewall is configured to modify (e.g. NAT or NAPT) the destination IP address of the IP
packets that match the firewall, this defines the new destination IP address of the IP
packets.
Trans. Dest Port
If the firewall is configured to modify (e.g. NAPT) the destination TCP/UDP port of the IP
packets that match the firewall, this defines the new destination TCP/UDP port of the IP
packets.
Protocol
The IP protocol of the IP packets that match the entry.
Interface
The interface over which the IP packets that match the entry are sent or received.
Related CLI Commands
Command
Options
Equivalent Web Parameter
fwall show Displays the Firewall Stateful Inspection table.