User`s guide

376
Management – Network Status > Interfaces > PSTN
This section contains the network status information for the PSTN interface.
Link Name
If a description of the interface has been assigned during the configuration, it will appear
here.
This PSTN interface is using PPP n
When configuring the PSTN module, a PPP instance is assigned – the instance number of the
assigned PPP interface appears here.
IP Address
The IP address assigned to the interface is shown here.
Mask
This value is the subnet mask being used by the interface.
DNS Server
The IP address of the DNS server being used by the interface appears here.
Bytes Received
This value is the number of bytes received by the interface.
Bytes Sent
This value is the number of bytes sent by the interface.
LCP Packets Received
This value is the number of Link Control Protocol (LCP) packets received.
LCP Packets Sent
This value is the number of LCP packets sent by the interface.
PAP Packets Received
This value is the number of Password Authentication Protocol (PAP) packets sent by the
interface.
PAP Packets Sent
This value is the number of PAP packets sent by the interface.
IPCP Packets Received
This value is the number of IP Control Protocol (IPCP) packets received by the interface.
IPCP Packets Sent
This value is the number of IPCP packets sent by the interface.
Receive Errors
This value indicates the number of frames received that contain an error (CRC etc).
Transmit Errors
This value indicates the number of frames that the interface attempted to transmit, but
were found to contain an error.
Refresh
Clicking this button causes the status page to be refreshed with the updated statistics.
Clear PPP n Statistics
Clicking this button causes the statistics to be reset to zero.