User`s guide

37
Entity
Instance
Parameter
Values
Equivalent Web Parameter
eth n tcptxbuf value in bytes TCP transmit buffer size
eth n linkdeact 0 - 86400
Take this interface out of service
after n seconds when the link is
lost
eth n do_nat 0,1,2
Enable NAT on this interface
0 = Disabled
1 = IP address
2 = IP address and Port
eth n ipsec 0,1 Enable IPsec on this interface
eth n ipsecent blank,ETH,PPP
Use interface x,y for the source IP
address of IPsec packets
x = Interface type
eth n ipsecadd 0 - 255
Use interface x,y for the source IP
address of IPsec packets
y = interface number
eth n firewall 0,1 Enable the firewall on this interface
eth n nocfg 0,1,2,3
Remote management access
0 = No restrictions
1 = Disable management
2 = Disable return RST
3 = Disable management
and return RST
eth n mhome 0 - 255
Multihome additional consecutive
addresses
eth n igmp 0,1 Enable IGMP on this interface
eth n bridge 0,1 Enable Bridge on this interface
eth n heartbeatip IP address
Send Heartbeat messages to IP
address a.b.c.d every h hrs m mins
s seconds
eth n hrtbeatint 0 - 86400
Send Heartbeat messages to IP
address a.b.c.d every h hrs m mins
s seconds
This CLI value is entered in seconds
only.
eth n hbipent blank,ETH,PPP
Use interface x,y for the source IP
address
x = Interface type
eth n hbipadd 0 - 255
Use interface x,y for the source IP
address
y = interface number
eth n hbroute 0,1
Select the transmit interface using
the routing table
eth n hbimsi 0,1
Include IMSI information in the