User`s guide

353
Entity
Instance
Parameter
Values
Equivalent Web Parameter
characters
tacplus 0 svr2
Up to 64
characters or valid
IP address a.b.c.d
Hostname or IP address of
server
tacplus 0 key2
Up to 20
characters
Server Key
tacplus 0 localauth OFF,ON
Enable local authentication if
there is no response from the
server(s)
tacplus 0 authent OFF,ON Enable TACACS+ Authentication
tacplus 0 author OFF,ON Enable TACACS+ Authorisation
tacplus 0 acct OFF,ON Enable TACACS+ Accounting
tacplus 0 debug OFF,ON n/a
Configuration – Security > TACACS+ > Advanced
The parameters described in this section should not normally need to be adjusted.
Use source IP Address x,y
If required, due to the TACACS+ server being accessed via a VPN tunnel, an alternative
source interface and instance may be selected here. Select the required interface from the
drop-down list and enter the instance of that interface into the adjacent text box. The
available interface options are Auto, PPP and Ethernet.
Response Timeout s seconds
Text box
Stop the negotiation if there is no activity for s seconds
The number in this text box specifies the amount of time (in seconds) before an inactive
socket is closed.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
tacplus 0 ip_ent
Blank,ETH,PPP
Blank = Auto
Use source IP Address x,y
tacplus 0 ip_add 0 - 2147483647 Use source IP Address x,y
tacplus 0 respto
0 – 2147483647
Default = 30
Response Timeout s seconds
tacplus 0 inact
0 – 2147483647
Default = 30
Stop the negotiation if there is
no activity for s seconds