User`s guide

348
Configuration – Security > RADIUS > RADIUS Client n
The following pages describe the configuration parameters available for setting up a RADIUS
client on the router.
Authorization
Primary Authorization Server
IP Address a.b.c.d
The value in this text box specifies the IP address of the primary authorisation NAS.
NAS ID
The value in this text box is an identifier which is passed to the primary authorisation NAS
and is used to identify the RADIUS client. The appropriate value will be supplied by the
primary authorisation NAS administrator.
Password
The value in this text box is the password supplied by the primary authorisation NAS
administrator and is used in conjunction with the primary authorisation NAS ID to
authenticate RADIUS packets.
Confirm Password
Type the above password into this text box so that the router may determine if the two are
identical.
Secondary Authorization Server
IP Address a.b.c.d
The value in this text box is the IP address of the secondary authorisation NAS server.
NAS ID
The value in this text box is an identifier which is passed to the secondary authorisation NAS
and is used to identify the RADIUS client. The appropriate value will be supplied by the
secondary authorisation NAS administrator.
Password
The value in this text box is the password supplied by the secondary authorisation NAS
administrator and is used in conjunction with the secondary authorisation NAS ID to
authenticate RADIUS packets.
Confirm Password
Type the above password into this text box so that the router may determine if the two are
identical.
Enable local authorization if there is no response from the authorization server(s)
When checked (default state), this checkbox will allow local authorisation if the RADIUS
servers are unreachable or not configured. Uncheck the box to disable local authorisation.
Accounting
Primary Accounting Server
IP Address
The value in this text box is the IP address of the primary accounting NAS.
NAS ID
The value in this text box is an identifier that is passed to the primary accounting NAS and
is used to identify the RADIUS client. The appropriate value will be supplied by the primary
accounting NAS administrator.