User`s guide

336
TCP MIB (RFC2012)
UDP MIB (RFC2013)
VRRP MIB (RFC2787)
SNMP MPD MIB (RFC3412)
SNMP USM MIB (RFC3414)
**
* The following groups/tables in RFC2233 are not supported: ifXTable, ifStackTable,
ifRcvAddressTable.
** The following groups/tables in RFC3414 are not supported: usmUserTable.
Other MIBs may be available on request.
Enable SNMPv1
Ticking this checkbox enables support for version 1 of the protocol.
Enable SNMPv2c
Ticking this checkbox enables support for version 2c of the protocol.
Enable SNMPv3
Ticking this checkbox enables support for version 3 of the protocol.
Use UDP Port n
This is the UDP port number to use. The default is UDP port 161.
SNMPv3 Engine ID
This is required as part of the SNMP v3 protocol. This is a 24 hexadecimal character string;
any trailing zeroes in this string making the value up to 24 characters can be omitted. A
remote engine ID is required when a SNMP v3 Inform is configured. The remote engine ID is
used to compute the security digest for authenticating and encrypting packets sent to a user
on the remote host.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
snmp n v1enable 0,1
Enable SNMPv1
0 = Off
1 = On
snmp n v2cenable 0,1
Enable SNMPv2c
0 = Off
1 = On
snmp n v3enable 0,1
Enable SNMPv3
0 = Off
1 = On
snmp n port 0 - 65535
Use UDP Port
Default = 161
snmp n engineid String SNMPv3 Engine ID