User`s guide

317
Configuration Alarms > Event Logcodes
This page allows you to edit the logcodes used to describe events entered in the
“EVENTLOG.TXT” pseudo file. If a change is made to the logcodes.txt file, the changes will
be saved in the file logcodes.dif so when a firmware upgrade is performed the changes to
the logcodes are retained.
The page that appears under the blue bar initially shows a table containing the Event
descriptions and reason. Clicking on an item shown in bright blue (an HTML link) causes a
configuration page associated with that item to be opened. The newly-opened page allows
that item to be configured. The configuration options shown on that page are described
below.
Event
This is not a configurable parameter; it is simply the event number, displayed for
information only. This is the number to refer to when filtering events in the event log
settings Configuration – Alarms > Event Settings.
Description
This field is a description of the event code. Clicking on a link in this field brings up the
configuration page associated with that event.
Filter
This parameter is for information only. If event filtering is applied to an event, the
associated filter is shown as “On”. This is a result of enabling the parameter ‘Do not log this
event’ as described below.
Event Priority
This parameter controls the priority of the event and is used to determine whether an event
will trigger email, SMS messages or SNMP traps.
Reasons
The reason why the event occurred. Not every event has a list of reasons.
Reason Priority
This parameter is for information only.
Attachment List ID
This is just a fixed list of values that may be used to conveniently refer to the associated list
of files to attach to an email.
Files
This text entry box allows the user to type in a comma-separated list of names for the files
that should be attached to an email.