User`s guide

Use the following IP address

Selecting this option enables manual configuration of the IP addressing parameters

IP Address

This parameter specifies the IP address of this Ethernet port on your LAN.

Mask

This parameter specifies the subnet mask of the IP subnet to which the unit is attached

via this Ethernet port. Typically, this would be 255.255.255.0 for a Class C network.

Gateway

This parameter specifies the IP address of a gateway to be used by the unit. IP packets

whose destination IP addresses are not on the LAN to which the unit is connected will be

forwarded to this gateway.

DNS Server / Secondary DNS Server

These parameters specify the IP address of DNS servers to be used by the unit for

resolving IP hostnames.

Note:

If the IP address, Mask, Gateway, DNS server or Secondary DNS server parameters are

specified manually, but the option to use a DHCP server is later selected, any existing

manually specified parameters will override the DHCP supplied parameters. To change from

manual configuration to DHCP, be sure to remove all manually specified parameters first.