User`s guide

283
Enable Leased Line Mode
When this parameter is set to “On”, it causes the PAD to always attempt to be connected
using the Auto macro setting as the call command.
Send ENQ on Connect
When this parameter is set to “On” the PAD will send an ENQ character on the ASY link
when an outgoing call has been answered.
Enable STX / ETX Filtering
When this parameter is “On”, the PAD will ignore data that is not encapsulated between
ASCII characters STX (Ctrl+B) and ETX (Ctrl+C). To disable this feature select the “Off”
option.
Delay connect message n x 10 milliseconds
Delay the Connect message by the number of milliseconds specified. (Useful when working
with equipment that previously connected to slower networks and is upset by the quicker
“Connect” when used with modern networks.)
Delay data transfer after connection by n x 10 milliseconds
Delays the data delivered from the X.25 or other type of connection to the terminal upon
initial connection.
Terminate the PAD call after x seconds if there has been no data transmission
This parameter specifies the length of time in seconds after which the PAD will terminate an
X.25 call if there has been no data transmission.
Disconnect the layer 2 call if there is no layer 3 call in progress for x seconds
This parameter specifies the length of time in seconds after which the unit will disconnect a
layer 2 link if there are no layer 3 calls in progress. For LAPB sessions this will also
terminate the ISDN call.
Create an event when the following data is on the PAD
This parameter specifies a string, which if it appears in the received data causes a “Data
Trigger” (47) event to be generated and recorded in the event log.
Create an event when there has been no activity on the PAD for x seconds
This specifies the time in seconds in which if there is no activity on the PAD an event in the
event log will be posted. This can be used to trigger email exceptions.
Related CLI Commands
Entity Instance Parameter Values
Equivalent Web
Parameter
pad n l2iface lapb, lapd, TCP, SSL Use PAD over interface
pad n l2nb
0 – 255 (instance of LAPB
or LAPD)
Use PAD over interface
pad n ip_stream
0 = off (for XoT), 1 = TCP,
2 = UDP
Use PAD over interface
pad n defpak
16,32,64,128,256,512 or
1024
Default X.25 packet size
pad n ansnua text (valid NUA)
Answer incoming calls
from NUA
pad n anscug text (valid CUG)
Only answer calls with
CUG