User`s guide

270
When answering a X.25 call, use the addresses from CALL packet in the CALL CNF
packet
When this setting is enabled when answering a call the called and calling addresses from the
CALL packet are used in the X25 CALL CNF (call confirm packet) that the unit sends to
answer the call. This setting can be enabled on a per “interface type” basis, (LAPD, LAPB or
XoT)
Reset XOT PVC if the router is the Initiator
When this parameter is enabled the unit is responsible for resetting the links when an XOT
PVC comes up. This parameter should only be set to “Off” when it is known that the
responder will reset the links.
Reset XOT PVC if the router is the Responder
When this parameter is set to “On” the unit is responsible for resetting the links on XOT PVC
links when it is the responder. The default for this parameter is “Off”.
Include length of header in IP length header
For all X.25 calls which include an IP header length indication (i.e. IP Length Header is set
to “On” a TPAD or PAD, etc.) this parameter specifies whether the length indicated includes
or excludes the length of the header itself.
By default it is “Off”, in which case the length of the header is NOT included in the value.
For example, say we had one byte of data of value 67 to encode. Then “00 01 67” is the
encoding if this parameter is set to “Off” as the length (00 01) is 1 because the length does
not include the length of the header. When set to “On” the length of the IP header is
included in the value, i.e. “00 03 67” is the encoding as the header bytes are included.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
X25gen 0 lapd_cnf_addr
1 = enabled,
0 = disabled
When answering a X.25 call, use
the addresses from CALL packet in
the CALL CNF packet.
LAPD setting
X25gen 0 lapd_cnf_addr
1 = enabled,
0 = disabled
When answering a X.25 call, use
the addresses from CALL packet in
the CALL CNF packet
LAPB setting
X25gen 0 xot_cnf_addr
1 = enabled,
0 = disabled
When answering a X.25 call, use
the addresses from CALL packet in
the CALL CNF packet
XoT setting
X25gen 0 reset_xotpvc_ini
1 = enabled,
0 = disabled
Reset XOT PVC if the router is the
Initiator
X25gen 0 reset_xotpvc_resp
1 = enabled,
0 = disabled
Reset XOT PVC if the router is the
Responder
X25gen 0 en_incl_iphdr
1 = enabled,
0 = disabled
Include length of header in IP
length header