User`s guide

259
Entity
Instance
Parameter
Values
Equivalent Web Parameter
snaip X srcipent auto, eth, ppp
Use interface for source IP
address
snaip x srcipadd 0 - 255
Use interface for source IP
address
snaip x sock_inact 0 - 2147483647
Close TCP connection if it is idle
for x secs
snaip x ver 0 - 2 DLSw Ver
snaip x passive 0 = active, 1 = passive DLSw Role
snaip x dlswwindow 1 - 100 DLSw Window
snaip x udp_cap 1 = enabled, 0 = disabled UDP Capable
snaip x use1sock On, Off, Compatible Use 1 socket
snaip x inc_mac_exc 1 = enabled, 0 = disabled
Include MAC Exclusivity Capability
snaip x mac_exc_val 0 - 1 Mac Exclusivity Value
snaip x iunsolresp 1 = enabled, 0 = disabled
Ignore unsolicited response
frames
snaip x waitforcontact 1 = enabled, 0 = disabled
Wait for Contact before
progressing to CONNECT
PENDING state
snaip x con_attempts 0 - 2147483647
Make immediate connection
attempts before backing off
snaip x con_boff_time 0 - 2147483647
Backoff for x seconds before
attempting to connect again
Forcing SNAIP to use a specific instance
If several SNAIP instances are sharing an ASY port, a switchover to a specific instance can
be initiated by issuing “snasw x”. Where x is the SNAIP instance number, this instance must
be available to go online or this command will fail.
To revert back and use the default instance, issue the “snadis x” command. Normal
priorities will be used to determine which SNAIP instance gets to use the SYNC port.