User`s guide

243
When configuring QoS, be aware that the router supports ten queues, numbered from 0 to
9 and that DSCP codes range from 0 to 64.
Configuration – Network > QoS > DSCP Mappings
Each DSCP value must be mapped to a queue. These mappings are set up using this page.
Default
This drop-down list selects the default queue. When this is changed, any DSCP codes that
are set to use the default will have their queue number changed.
DSCP
This column is simply a list of valid DSCP codes with an associated drop-down list box to the
right.
Queue
Each of the DSCP codes in the left-hand column has a queue associated with it. To change
the value from what is shown, select the desired value from the drop-down list.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
dscp n q
0 – 63
Default 4
Queue
Example command line commands.
To display a DSCP mapping from the command line, type the following:
dscp <code> ?
Where <code> is a valid DSCP code from 0 to 63, or 64 (but see note below).
To change the value of a parameter, use the following command:
dscp <code> q <value>
Where <code> is a valid DSCP code and <value> is from 0 to 9.
To set the default mapping value, enter the command:
dscp 64 q <value>
Where <value> is the default queue number required and has a value from 0 to 9.
Note:
DSCP code 64 is not actually a valid code but is used to set up the default priority.
Configuration – Network > QoS > Queue Profiles
Up to 12 distinct queue “profiles” may be defined using this page that may then be assigned
to QoS queues as required. The queue profile determines how QoS queues with that profile
assigned to them will behave.
Queue
This is the queue number that relates to the queues defined in the DCSP mappings page.
Minimum kbps
The value in this text box sets the minimum data transfer rate in kilobits/second that the
router will try to attain for the queue.