User`s guide

Configuring your TransPort router

This section describes the various configuration parameters for the unit and how to set or

change them using the built-in web pages or the text commands. Configuration using the

Web pages is achieved by entering the required values into text boxes or tables on the

page, or by turning features on or off using checkboxes. The same results can be achieved

entering the appropriate text commands via one of the serial ports.

Logging In

To configure the unit via the Web interface, either establish a DUN connection to it and then

open your web browser and enter 1.2.3.4 for the web address, or enter the unit’s Ethernet

IP address (192.168.1.1) into your web browser after configuring your PC to have an

address on the same subnet.

You will be presented with a login page similar to the following:

ING YOUR UNIT

The default Username and Password are “username” and “password” respectively. Enter

these and click the

displayed as a series of dots for security purposes.