User`s guide

232
Enable Debug
The router supports logging and output of debugging information for situations where there
are problems establishing a SSH connection. When checked, this checkbox causes the
router to trace and output information that should be helpful in diagnosing and resolving the
problem.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
ssh 0 – 7 port 0 - 65535 Use TCP port p
ssh 0 - 7 nb_listen 0 - 2147483647 Allow up to n connections
ssh 0 - 7 hostkey1
Up to 12
characters (8.3
format)
Host Key 1 Filename
ssh 0 - 7 hostkey2
Up to 12
characters (8.3
format)
Host Key 2 Filename
ssh 0 - 7 loginsecs 0 - 2147483647 Maximum login time s seconds
ssh 0 - 7 logintries 0 - 2147483647 Maximum login attempts n
ssh 0 - 7 comp 0 = disabled Use Deflate compression , level
ssh 0 - 7 fwd 0 - 2147483647 Enable port forwarding
ssh 0 - 7 cmdhost
Valid IP address
a.b.c.d
Command session IP address
a.b.c.d
ssh 0 - 7 cmdport 0 - 2147483647 Command session port p
ssh 0 - 7 svrkeybits 0 - 2147483647 Server key size
ssh 0 - 7 initkex OFF,ON Actively start key exchange
ssh 0 - 7 rekeybytes
0 - 2147483647
0 = Do not rekey
Rekey After n units of data have
been transferred
ssh 0 - 7 enc3descbc
0 - 2147483647
0 = Disabled
3DES
ssh 0 - 7 encaes128cbc 0 - 2147483647 AES (128 bits)
ssh 0 - 7 encaes192cbc 0 - 2147483647 AES (192 bits)
ssh 0 - 7 encaes256cbc 0 - 2147483647 AES (256 bits)
ssh 0 - 7 macmd5 0 - 2147483647 MAC MD5
ssh 0 - 7 macmd596 0 - 2147483647 MAC MD5-96
ssh 0 - 7 macsha1 0 - 2147483647 MAC SHA1
ssh 0 - 7 macsha196 0 - 2147483647 MAC SHA1-96
ssh 0 - 7 debug
0,1
0 = Off
1 = On
Enable Debug