User`s guide

157
Enable Web Server (HTTP)
Much of the configuration of the router may be performed using the web GUI as described
here. However, HTTP is an insecure protocol and so for security reasons, this service may
be disabled by deselecting this radio button and hence, enabling the following secure web
server. If security is not such an issue, selecting this option allows the simpler and slightly
more convenient web server to be used.
Enable Secure Web Server (HTTPS)
Select this radio button to disable the insecure HTTP protocol and enable the HTTPS service.
Related CLI Commands
Entity
Instance
Parameter
Values
Equivalent Web Parameter
snmp n v1enable
0,1
0 = Off
1 = On
Enable SNMP v1
snmp n port Default 161 UDP Port n
snmp n v2cenable
0,1
0 = Off
1 = On
Enable SNMP v2c
snmp n v3enable
0,1
0 = Off
1 = On
Enable SNMP v3
sntp 0 srvr_mode ON,OFF
Enable Simple Network Time
Server (SNTP)
sntp 0 time_src
0 = RTC
1 = GPS
2 = NTP Client
Source
sockopt n ssh_server_ena ON, OFF Enable Secure Shell Server
sockopt n telnets ON, OFF Enable Telnet over SSL
sockopt n https ON, OFF Enable Secure Web Server