User`s manual

WARNING
Make sure your computer is turned off before installing or removing boards. When installing or removing boards, always use
adequate precautions (such as a grounding strap) to prevent electrostatic damage.
Test your SYNC/570i-56 using the diagnostics disk provided. If the SYNC/570i-56 passes all the tests, the problem is
probably elsewhere.
The symptoms of particular problems may vary between operating systems. Common problems are listed below.
Address/Interrupt Conflicts
All devices in your system must have unique addresses that must not overlap. The memory location must be outside
the caching memory range. If you think you have a conflict problem, try alternate settings.
Inconsistent Baud Rate
The baud rate and other parameters chosen via the operating system must be the same for the SYNC/570i-56 and the
peripherals connected to it.
No Handshaking Signals
Some peripheral devices may need some or all of the handshaking signals that SYNC/570i-56 supports.
Incomplete or Incorrect Installation
Some operating systems require that an installation procedure be run before SYNC/570i-56 is recognized.
Refer to your operating system user's manual. Verify correct SYNC/570i-56 hardware installation.