User`s manual

10.

11.

12.

Reboot the computer with the backup copy of your computer

system’s reference diskette. The computer will show error

165

and

beep twice. Continue as instructed.

Follow the instructions shown on the screen to select the mode

necessary to

manuaIly

set the configuration--do not use the auto-

matic

amfIguration.

(The instructions for manual configuration will

vary for computers ma& by different manufacturers.)

When you are prompted to copy the new adapter files, insert the

Digi

Diagnostics Diskette.

Press ENTER. The computer will read the

@6163.ADP

file.

At the prompt, remove the diagnostics disk and reinsert the reference

diskette.

Press ENTER. The file

@6163ADF

copies to the reference disk.

Follow the instructions shown on the screen to set or change the

configuration for the

Digi

SYNC/570 or

SYIW57Oi.

Select the I/O address, memory address, and IRQ from the list of

addresses and interrupt lines shown.

Follow the instructions to save the configuration you have chosen

and to exit the program.

Remove the copy of the reference diskette.

Chapter

Six: Configuring the

Micm

Channel

SYNC/570 and

SYNC/570i