User`s manual

4.
5.
6.
7.
board before you install the board. Refer to Section 5 for switch
settings. When you have set the switch, continue with the board
installation below.
If you are installing a SYNC/570 or SYNC/57Oi in a Micro Channel
computer, proceed with the board installation. When the board is
installed, configure it as described in Section 6.
Insert the SYNC/570 or SYNC/57Oi board into the mating mother-
board socket. Push the board firmly into place.
Secure the board by tightening the thumb screw or replacing the
board hold-down screw that was removed in Step 2.
Replace the computer cover and reconnect the power cord
Complete the software configuration of the board.
10 Chapter Four: Installing the SYNC/570 and SYNC/570i