User`s manual

Using a receptacle for only the computer and terminal also protects against

data errors or equipment damage. Sharing the receptacle with

noise-

producing devices such as fax machines, printers, calculators, and heaters

may allow noise pickup.

Grounding Techniques

Many terminals and computers are dependent on earth ground to set a

reference for signal ground. Improper grounding or differences in ground

potential between your computer and terminals can damage your equip-

ment or even create a safety hazard. Consequently, you should make sure

that every component in your system is properly grounded.

Connect your computer and all terminals and other peripherals to

three-

pronged grounded receptacles, making sure that the receptacles are wired

properly. If you must use three-prong to two-prong adapters, make sure

that the adapter ground tabs are properly grounded.

A proper chassis ground guarantees that no dangerous voltages exist on

terminal frames. Proper grounding also helps cancel noise that can other-

wise be induced on the frame or equipment.

Local electrical codes may also dictate special grounding arrangements.

Your electrician can make sure that your installation complies with all

applicable codes. If you have any doubt about the integrity of the ground-

ing system in your location, have the system checked by a licensed

electrician.

Static Protection

Your computer’s case not only houses its family of computer components,

but it also protects these sensitive electronic components from stray mag-

netic

@VII)

and electrical

WI,

static) fields.

&ILL

WARNING

Using pn@er

stattc

control

metboa

esseniial

wheneoeryou

use, move, or

open

ymcr

computerfor modifications.

Chapter Two: Protecting Your Equipment and Data