Hubport USB HUB Installation Guide Models: Hubport/4 Hubport/7 /c Models: Hubport/4c Hubport/7c Hubport/4c DC Hubport/7c DC www.digi.
Table of Contents Table of Contents ............................................................. 1 Introduction to Hubs ........................................................ 1 Connecting Your Hubport ................................................ 2 Installing Hubport Drivers ............................................... 3 Interpreting the System Status Light ................................ 3 Regulatory & Other Information......................................
Introduction to Hubs Thank you for purchasing the Hubport, a self-powered Universal Serial Bus (USB) hub designed to provide a convenient and effective means of bringing USB connectivity to your PC, server, or laptop. The Hubport also delivers the potential of Digi International’s Edgeport USB to Serial (RS-232) expansion module.
Specifications Hubport/4 USB2.0 High Speed† No Hubport/4c Yes Hubport/4c DC Hubport/7 Hubport/7c Hubport/7c DC Yes No Yes Yes Product Powering Method Self* Self* USB Bus Self* Self* Self * Self* USB Downstream Ports 4 4 2 4 7 7 7 Power Requirements 5VDC @2A 5VDC @2A None Variable 10 - 28VDC @15W 5VDC @3A 5VDC @3A Variable 10-28DC @24W Connecting Your Hubport Type A Type B Note that Windows NT 4.0 users must install the drivers before connecting a Hubport.
Installing Hubport Drivers For Windows 98, 2000, and XP Users After following the instructions described in ―Connecting Your Hubport‖ in the previous section, installation will be complete. For Windows NT 4.0 Users Because Microsoft does not support USB in NT4.0, Digi International supplies a set of USB drivers that will be installed along with the necessary Hubport drivers.
Regulatory & Other Information © 2006 Digi, Digi International, the Digi logo, the Digi Connectware logo, Edgeport, and Hubport are either trademarks or registered trademarks of Digi International, Inc. in the United States and/or other countries. All other trademarks are the property of their respective holders. Information in this documentation is subject to change without notice and does not represent a commitment on the part of Digi International.
Product Name: Hubport/4 Model Numbers North America International 301-1010-04 301-2010-04 Product Name: Hubport/4c Model Numbers North America International 301-1010-45 301-2010-24 EN 60950:1992 + A1, A2, A3, A4 EMC The following summarizes the specifications and requirements for EN55024:1998, EN55022:1998 Class B & CISPR 22 Class B emission and immunity tests and the EN61000-3-2(2000), EN61000-3-3(1995) current harmonics and voltage variation tests. Actual test levels are listed in the appropriate tables.
Digi International 11001 Bren Road East Minnetonka, MN 55343 digi.info@digi.com www.digi.com Corporate Headquarters: 952-912-3444 877-912-3444 Fax: 952-912-4952 Digi Europe: +49-231-9747-0 Digi Hong Kong: +852-2833-1008 Digi North America: 877-912-3444 Hubport Installation Guide (90000664 Rev.
