User`s manual

MiniCore RCM5700/RCM6700 User’s Manual rabbit.com 85
E.2.1 Headers
The Serial Communication accessory board has a header socket at J2 for physical connection to
other boards above it, and a header socket at J12 on the bottom side to connect to boards below it.
J2 and J12 are 2 × 25 SMT header sockets with a 0.1" pin spacing. Figure E-3 shows the layout of
another board to be plugged into the Serial Communication accessory board — this footprint is
identical for the Prototyping Board and the two accessory boards. The values are relative to the
mounting hole.
Figure E-3. MiniCore Boards Footprint
(All measurements are in inches followed by millimeters enclosed in parentheses.)