User`s manual

MiniCore RCM5700/RCM6700 User’s Manual rabbit.com 64
B.5 Using the Interface Board
The Interface Board is also a demonstration board. It can be used to demonstrate the functionality
of the MiniCore right out of the box without any modifications to either board.
The Interface Board comes with the basic components necessary to demonstrate the operation of
the MiniCore . One LEDs (DS1) is connected to PD0, and one switch (S1) is connected to PD1 to
demonstrate the interface to the Rabbit microprocessor. Reset switch S2 is the hardware reset for
the MiniCore .
The Interface Board provides the user with MiniCore connection points brought out conveniently to
header socket J2. Other boards such as the Prototyping Board or the accessory boards from the
Deluxe Development Kit can be plugged into header socket J2. The pinouts for header socket J2 are
shown in Figure B-5.
Figure B-5. Interface Board Pinout