User`s manual

MiniCore RCM5700/RCM6700 User’s Manual rabbit.com 52
A.1.1 mini PCI Express Connector Design Recommendations
The MiniCore is mounted on the Interface Board via a mini PCI Express connector and a corre-
sponding locking latch connector. These are offered by manufacturers as a matched set, although
in some cases different manufacturer’s parts may be interchangeable. Table A-3 lists the recom-
mended parts for the mini PCI Express connector and the locking latch connector used for the Interface
Board. (All measurements are in inches followed by millimeters enclosed in parentheses.)
Figure A-3 shows a footprint for the SMT connectors in Table A-3.
Figure A-3. PCB SMT Footprint for Pinrex and FOXCONN Connectors
Table A-3. Interface Board Connector-Related Parts
Connector Part Manufacturer Part Number
Rabbit Store Part
Number
mini PCI Express Connector Pinrex 984-63-052202 498-0090
Latch Connector FOXCONN AS0B226S68K-7F 498-0091