User`s manual

82 MiniCore RCM5600W
The SMT connectors are ideal in a development environment, where the latch connector
facilitates swapping RCM5600W MiniCore modules as development progresses. The
absence of holes also maximizes trace routing flexibility on the printed circuit board. The
standoff option offers better vibration resistance and grounding once you are ready to
deploy your application based on the RCM5600W.
A.2 Rabbit 5000 Microprocessor Characteristics
The Rabbit 5000 Microprocessor User’s Manual, which is included with the online docu-
mentation
, provides complete specifications and timing diagrams for the Rabbit 5000
microprocessor.
Rabbit’s Technical Note TN227, Interfacing External I/O with Rabbit Microprocessor
Designs, which is also included with the online documentation, contains suggestions for
interfacing I/O devices to the Rabbit 5000 microprocessors.
Table A-4. Standoff Heights Based on mini PCI Express Connectors
mini PCI Express Connector
Height
Standoff Height Remarks
6.8 mm 4.4 mm Used with Interface Board
9.2 mm 6.8 mm Used with Accessory Kit
The Rabbit store sells an accessory kit (Part No. 101-1306)
with the standoffs, screws, and mini PCI Express connector
needed to mount an RCM5600W using the footprint shown
in Figure A-4. The heights of the mini PCI Express connec-
tor and the associated standoffs in the accessory kit are
shown in millimeters at right.
mini PCI Express
connector
6.8
9.2