User`s manual

OEM User’s Manual 77
It is recommended that you allow for an “exclusion zone” of 0.08" (2 mm) around the
RCM5600W top and bottom and 0.04" (1 mm) around the three non-connector edges
when the RCM5600W is incorporated into an assembly that includes other printed circuit
boards. This “exclusion zone” that you keep free of other components and boards will
allow for sufficient air flow, and will help to minimize any electrical or electromagnetic
interference between adjacent boards. Figure A-2 shows this “exclusion zone.”
Figure A-2. RCM5600W “Exclusion Zone”
0.08
(2)
0.08
(2)
Exclusion
Zone
0.04
(1)
0.04
(1)
0.08
(2)
0.326
(8.3)
0.04
(1)
0.08
(2)
0.326
(8.3)
2.00
(51)
1.20
(30)