User`s manual

64 MiniCore RCM5600W
• PINGLED_STATS.C—This program is similar to PINGLED.C, but it also displays
receiver/transmitter statistics in the Dynamic C STDIO window.
Before you compile and run this sample program, change PING_WHO and IFC_WIFI_
SSID
to the host and SSID you want to ping. You may modify PING_DELAY to change
the amount of time in milliseconds between the outgoing pings.
Modify the value in the MOVING_AVERAGE macro to change the moving average filter-
ing of the statistics. Also review the GATHER_INTERVAL and GRAPHICAL macros,
which affect the number of samples to gather and create a bar graph display instead of a
numeric display.
Uncomment the VERBOSE define to see the incoming ping replies.
Once you compile and run this sample program, LED DS1 on the Interface Board will
go on with a brief toggle off when a ping is sent, and the LED will go off for a longer
duration when a ping is received.
• SMTP.C—This program demonstrates using the SMTP library to send an e-mail when
the S1 switch on the Interface Board is pressed. LED DS1 on the Interface Board will
light up when e-mail is being sent. LED DS1 is controlled by PD0.